Sentences with UNSOLDER
Check out our example sentences below to help you understand the context.Sentences
1
"He carefully unsoldered the components of the circuit board."
2
"The technician was able to unsolder the faulty connection."
3
"She used a soldering iron to unsolder the wires."
4
"The solder joint was weak, so he decided to unsolder and redo it."
5
"He had to unsolder the resistor in order to replace it."
6
"The wires were tangled together and she had to unsolder them before separating."
7
"In electronics repair, it is often necessary to unsolder and resolder components."
8
"The heat gun was used to unsolder the large connector."
9
"They had to unsolder the old battery before installing a new one."
10
"To fix the circuit, she had to unsolder the damaged capacitor."
11
"He tried to unsolder the chip but ended up damaging it."
12
"The solder had become brittle over time, making it easier to unsolder."
13
"The manual provided step-by-step instructions on how to unsolder the parts."
14
"She struggled to unsolder the tiny pins on the integrated circuit."
15
"He needed to unsolder the socket to replace it with a new one."
16
"The soldering iron was not hot enough to unsolder the joint."
17
"They applied flux to the joint before attempting to unsolder it."
18
"She decided to unsolder the entire section and start afresh."
19
"With some practice, he became skilled at unsoldering delicate connections."
20
"The technician used a desoldering pump to quickly unsolder the joints."
1
"I unsoldered the wire from the circuit board."
2
"He unsoldered the components to repair the laptop."
3
"The technician carefully unsoldered the faulty connection."
4
"She needed to unsolder the joint before making any modifications."
5
"The soldering iron was used to unsolder the electronic components."
6
"They unsoldered the connection to replace the damaged part."
7
"He had to unsolder the old battery before installing a new one."
8
"The repairman unsoldered the broken wire to fix the electrical system."
9
"She learned how to unsolder and replace damaged capacitors."
10
"He decided to unsolder the entire circuit to start from scratch."
