Sentences with SPRUES
Check out our example sentences below to help you understand the context.Sentences
1
"The sprues were carefully removed from the molded pieces."
2
"The injection molding process involves creating sprues to channel the melted plastic."
3
"The sprues help to control the flow of molten metal in casting."
4
"The excess metal is usually located in the sprues after casting."
5
"The sprues are trimmed off the final product to improve its appearance."
6
"Several sprues are connected to a central pouring cup in the mold."
7
"The sprues need to be designed properly to ensure efficient casting."
8
"The sprues allow for the escape of gasses during the casting process."
9
"A network of sprues is used to distribute the molten metal evenly."
10
"The removal of sprues is an essential step in finishing the product."
11
"The sprues act as channels for the resin in resin casting."
12
"Air vents are often connected to sprues to prevent air pockets."
13
"The sprues serve as pathways for the molten material to enter the mold."
14
"The shape and size of the sprues affect the quality of the casting."
15
"The sprues need to be cut and sanded to ensure proper fit and function."
16
"During assembly, the sprues are attached to the corresponding parts."
17
"The sprues are discarded after the molding process is complete."
18
"The sprues are inspected for any defects or imperfections."
19
"The length of the sprues can be adjusted depending on the size of the mold."
1
"The sprues are used to channel molten metal into the mold cavity."
2
"After the casting process, the sprues are removed from the final product."
3
"The size and shape of the sprues can affect the flow of the liquid metal."
4
"In jewelry making, sprues are used to attach the wax pattern to the flask."
5
"The sprues are carefully positioned to ensure even distribution of the molten material."
6
"The excess material from the sprues is usually recycled for future use."
7
"To create a clean cast, the sprues must be free from any defects or obstructions."
8
"Investment casting typically requires the use of sprues for successful molding."
9
"The sprues should be designed in a way that allows for easy removal without damaging the cast."
