Sentences with CENTER-PUNCH
Check out our example sentences below to help you understand the context.Sentences
1
"He used a center punch to mark the spot for drilling."
2
"The center punch left a small indentation in the metal."
3
"The mechanic used a center punch to remove a stuck bolt."
4
"She applied pressure with a center punch to create a starting point for the screw."
5
"The carpenter grabbed his center punch to make a tiny hole in the wood."
6
"The center punch slipped from his hand and hit the ground with a clink."
7
"He tapped the center punch with a hammer to mark the exact center."
8
"The blacksmith used a center punch to make a mark on the hot iron."
9
"She gently struck the center punch to create a small dent in the material."
10
"The metalworker used a center punch for precision alignment."
11
"He grabbed a center punch and began to carefully mark the locations."
12
"The center punch slipped off target and created a small scratch."
13
"The carpenter used a center punch to create starter holes for the screws."
14
"She used a center punch to guide the drill bit into the wall."
15
"He missed the mark with the center punch and had to start over."
16
"The technician used a center punch to secure the wire in place."
17
"He applied too much force with the center punch and damaged the surface."
18
"She used a center punch to create a small indentation in the metal plate."
19
"The mechanic reached for a center punch to loosen the tight nut."
20
"He struck the center punch with precision, leaving a mark in the material."
1
"I used a center punch to mark the starting point for drilling."
2
"The mechanic used a center punch to indent the metal before drilling."
3
"John accidentally broke his center punch while using it."
4
"The blacksmith used a center punch to create a divot in the metal."
5
"Please hand me the center punch from the toolbox."
6
"The carpenter used a center punch to create small holes for aligning the wood pieces."
7
"Make sure to wear safety goggles when using a center punch."
8
"The machinist used a center punch to make indentations on the metal piece."
9
"The jewelry maker used a center punch to mark where to place the gem."
10
"The center punch slipped and caused a scratch on the surface of the material."
