Sentences with CROSS-BIT
Check out our example sentences below to help you understand the context.Sentences
1
"He used a cross bit to drill through the metal sheet."
2
"The cross bit got stuck in the wall, and he had to call for help."
3
"I need to buy a cross bit for my power drill."
4
"She carefully replaced the cross bit on the drill with a new one."
5
"The cross bit broke while drilling into the hardwood."
6
"He changed the cross bit to a larger size for the next hole."
7
"The plumber used a cross bit to create a hole for the pipe."
8
"I couldn't find the right cross bit for my drill in the toolbox."
9
"The mechanic used a cross bit to remove the rusty screws."
10
"I accidentally dropped the cross bit and it rolled under the workbench."
11
"She carefully inserted the cross bit into the chuck of the drill."
12
"The carpenter sharpened the cross bit before starting the woodworking project."
13
"He attached an extension to the cross bit to reach a higher spot."
14
"The cross bit slipped out of his hand and fell onto the floor."
15
"I ordered a set of different-sized cross bits online."
16
"The electrician needed a cross bit to install the light fixture."
17
"The cross bit created a clean hole in the masonry."
18
"He tightened the chuck around the cross bit to secure it in place."
19
"The cross bit was too dull to penetrate the metal surface."
20
"I need to sharpen the cross bit before starting the project."
1
"She used a cross bit to drill holes in the wooden plank."
2
"The carpenter chose a cross bit to create a mortise for the dowel."
3
"He inserted the cross bit into the power drill before starting the project."
4
"The cross bit broke while drilling through the metal surface."
5
"The construction worker replaced the worn-out cross bit with a new one."
6
"To achieve precision, he adjusted the angle of the cross bit."
7
"The drilling team used a specialized cross bit for rock excavation."
8
"A cross bit provides better leverage when drilling into hard materials."
9
"The engineer selected a cross bit with a larger diameter for the job."
10
"She sharpened the cross bit to ensure clean and efficient drilling."
