Sentences with ADHERENDS
Check out our example sentences below to help you understand the context.Sentences
1
"Ensure that the adherends are clean and free from contaminants."
2
"Apply adhesive evenly to both adherends before joining them together."
3
"The strength of the bond depends on the compatibility of the adherends."
4
"The adherends need to be properly aligned for a successful bond."
5
"Before applying the adhesive, roughen the surfaces of the adherends."
6
"Inspect the adherends for any defects or irregularities."
7
"Join the adherends together and hold them firmly in place."
8
"Follow the recommended curing time for the adhesive to bond the adherends."
9
"The adhesive has excellent adhesion to a wide range of adherends."
10
"Ensure that the temperature is suitable for bonding the adherends."
11
"The adherends should have sufficient contact area for a strong bond."
12
"The manufacturer provides guidelines for bonding different adherends."
13
"Proper surface preparation is essential for bonding the adherends effectively."
14
"The adhesive forms a durable bond between the adherends."
15
"Avoid applying excessive pressure on the adherends during curing."
16
"The adhesive provides high shear strength for bonding the adherends."
17
"The joint design influences the load-bearing capacity of the adherends."
18
"Inspect the bonded adherends for any signs of failure or debonding."
19
"The adherends should be clamped together until the adhesive cures completely."
20
"The adhesive exhibits excellent adhesion properties even on difficult adherends."
1
"The adhesive is used to bond the adherends together."
2
"The strength of the bond depends on the quality of the adherends."
3
"The manufacturer recommends cleaning the adherends before applying the adhesive."
4
"The surface of the adherends must be free from any contaminants."
5
"The adherends should be properly aligned before bonding."
6
"Proper preparation of the adherends is crucial for a successful bond."
7
"Different materials require different surface treatments of the adherends."
8
"The adhesive should be applied evenly on both adherends."
9
"The joining of two adherends must be done with care."
10
"It is important to select the correct adhesive for the specific adherends being bonded."
